This is the essense of his Idea:
Introduction
This is a new technology and it was not a modified or improved technology. It should be implemented in all the Automobiles as a newer technology. The implementation of this technology in automobiles does not require any other additional or expensive devices except two Sensors in the Right and Left side of an automobile respectively. But where as there is a small device called Sensor Post and this should be placed in the corresponding places on roads to Transmit the signals.
Need for this Technology? (Understanding the GAP)
There are various methods in measuring speed but there is no devices or technology to control the speed automatically. In more cities there is only a camera to detect the speed of an automobile. If an automobile exceeds the speed limit then the camera take the picture(s) of the car with registration number and the corresponding driver is punished or it leads to the cancellation of license. This newer technology will overcome these problems.
Objective
The objectives of this system are as follows.
-Automatic control of speed without any force by Driver.
-Prevention of Accidents due to over speed.
-Prevention of Rash Driving.
Principle Behind the Technology
•The main principle is the use of Microprocessor.
•The microprocessor is set to work which is based on the received signal from the Signal Post.
•The use of Receiver and Transmitter.
He had further given details of his product, but for the present discussion I feel this information is sufficient.
Questions For Mr. Xavier
1.Are there any other products in the market which satisfies this gap which you had identified?
2.Try to apply to the patent office and do a patent search.
3.The sensor post is not in your control. How are you going to approach the Government for the implementation of this product???
No comments:
Post a Comment